Connecting The Ac Adapter - Sharp PC-9300 Manual

Connecting the AC Adapter

Your notebook can be powered by the internal, removable, rechargeable battery
pack, or it can be connected to a wall power outlet using the supplied AC adapter.
More information on the notebook's power requirements can be found in the topic
Power Supply in Chapter 4.
Note: Use the AC adapter to connect your computer to a power source
before turning on your notebook for the first time.
To start using your notebook, follow the steps below:
1. Make sure the notebook is turned off.
2. Connect the cable from the AC adapter to the AC adapter jack.
3. Connect the power cord to the AC adapter.
Caution: Only use the approved AC adapter (EA-905V) that is supplied
with the system. Do not use any other adapter than the one supplied with
the system. The AC adapter can be connected to a power outlet using a
voltage level of from AC 100 - 250 volts. The voltage rating of the power
cord is, however, variable from country to country. Please consult your
vendor for more information.
4. Insert the AC power cord plug into a wall outlet.
To Wall
Outlet
AC Adapter
2-1