Connecting Ac Power - Sharp Actius PC-GP20 Operation Manual

Connecting AC Power

1. Plug the AC adapter cable into the AC adapter jack on the rear side of your
computer.
2. Plug the AC power cord into the AC adapter.
3. Plug the AC power cord into a wall outlet.
• Always use the AC adapter included with the computer. Using other AC
adapters may damage the computer.
• Always hold the AC power cord by its plug when removing it from the
wall outlet. Never pull on the cord.
• When using the computer for the first time, be sure to connect it to AC
power. When using the battery instead, you may not be able to
complete the Windows XP setup if the battery does not have enough
power.
4. Slide the display cover lock lever to the right until the display cover releases, and
raise the cover.
AC Adapter Jack
AC Power Cord
Display Cover Lock Lever
AC Adapter
To Wall Outlet
1
1-3