Using The Optical Drive - Sharp Actius PC-GP20 Operation Manual

Using the Optical Drive

With the optical drive, you can read data from CD and write data into CD-R/RW.
Furthermore, you can enjoy a movie etc, with the DVD-ROM disk.
CAUTION FOR LASER
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
Maximum output and wavelength of the laser: 85mW, 795nm(CD-R/RW)
CLASS 1LASER PRODUCT
Handling Disks
•
Do not write on either side of the disk, particularly the non-label side. Data is read
from the non-label side. Do not mark this surface.
•
Keep your disks away from direct sunlight, heat and excessive moisture.
•
Always hold the disks by the edges. Fingerprints, dirt or water on the disks can
cause noise or mistracking. If a disk is dirty or does not play properly, clean it with
a soft, dry cloth, wiping straight out from the center, along the radius.
Inserting a Disk
1. Make sure the optical drive indicator is not lit on; then, press the eject button.
The drive tray opens slightly.
LASER KLASSE 1
Eject Button
6mW,668nm(DVD-ROM)
Optical drive Indicator
2
2-15