Setting Up Your Pc For Infrared Communications (Ircom) - Sharp XG-P25X Operation Manual

Setting up your PC for Infrared Communications (IrCOM)

If you use the NV5/6/7, image transfer can be performed using infrared
communications (IrCOM).
To use infrared communications, set the PC's port for infrared
communications according to the following steps.
Infrared communications (IrCOM) cannot be used with Windows NT4.0
Workstation, Me, 2000 Professional, XP Home or Professional Edition.
1
2
Click "Start", and then click "Settings", then select
"Control Panel".
| The "Control Panel" window will open.
Double click the "Infrared" icon.
| The "Infrared Monitor" window will open.
For Windows 95 users:
If an "Infrared" icon is not displayed the Microsoft IrDA 2.0 (Infrared
Driver) is not installed on the computer.
You can obtain it from the Microsoft's site on the Internet.
16