Sharp XG-P25X Operation Manual page 34

Multi
All Projector List: All the identifiable connected projectors are listed
t
y
u
i
Some items may not be displayed, depending on the type of projector.
here.
All Projector List: Displays a list of all the identifiable connected
projectors.
The information displayed in "All Projector List" is as follows:
G Power
: When the power supply of a projector is ON, the
green icon is displayed. When it is OFF, the red
icon is displayed. (For a projector assigned as a
backup, "B" is attached to the icon.)
When an error occurs in a projector, an "!" mark is
displayed.
G Projector : Projector Name
G ID
: ID Number
G Port
: Port the projector is connected to (COM or LAN)
G Group
: Group Name the projector belongs to
G Input
: Selected Input Mode
G Lamp
: Accumulative usage time of a lamp (when more
than two lamps are used, the accumulative usage
time of the longest used lamp is displayed) or
remaining lamp life in percentage.
G Status
: Status of a projector
G Vol
: Volume
G Info
: Resolution or signal type of a projected image
G COM
: Transmission status ("OK" or "ERR")
G Backup
: When another projector stands by as a backup
projector, the ID Number, Port and Projector Name
of the backup projector are displayed. When a
projector is assigned as the backup of another
projector, the ID Number, Port and Projector Name
of the projector which is backed up is displayed.
Refresh all the display information
Refresh the displayed information for the selected projector with
the most recent information.
Jump to "Advanced Control for
for the selected projector.
34
Adjustment" to conduct adjustments