Basic Operation of the Adjustment Sheet
Button icon
Pull down menu
Slide bar
Sending all adjusted data on the sheet to the projector.
Receiving the adjusted data from the projector
You can set the adjustment item by clicking the button icon (Eg; "Power
ON/OFF", "Auto Sync",etc.).
You can set the adjustment item by selecting the desired setting from
the pull down menu (Eg; Gamma, etc.).
You can adjust the item by dragging the slide bar or entering the
desired value (Eg; Contrast, etc.).
Click the "Send" button to control all the adjustments on the sheet.
Click the "Receive" button to confirm the adjustments on the projector.
Single
63
Multi