Setting The Environment Of The Target Pc - Sharp PN-V601 Operation Manual

●Setting the environment of the target PC
Once the installation is complete, change the settings of the target PC before using this software. A
description is given below, using Windows XP/Vista/7 as an example.
Auto login settings
If the target PC is to be used without an operator, Windows auto login should be enabled.
If using Windows Vista, use the following procedure to enable auto login.
1. From the Windows Taskbar, click [Start], [All Programs], [Accessories], and then [Command
Prompt].
The [Command Prompt] window will appear.
2. Type in "control userpasswords2" (without the inverted
commas) and push [Enter].
3. If the [User Account Control] window appears, click
[Continue].
The [User Accounts] dialog box will appear.
4. Clear the "Users must enter a user name and password
to use this computer" check box.
5. Click [OK].
6. In the [Automatically Log On] window, enter a "User
Name" and "Password", and click [OK].
7. Type in "exit" and then press [Enter].
Installing SHARP Digital Signage Software
15