Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for AND UA-767PC
Summary of Contents for AND UA-767PC
-
Page 2: Preliminary Remarks
93/42 EEC for Medical Products Act; Medical Products Act; European Standards for Electrical Medical Equipment EN 60601-1 (General Safety Provisions), EN 60601-1-2 and EN 55011 (Electromagnetic Compatibility); European Standards pertaining to Non Invasive Blood Pressure Instruments EN 1060-1(General Requirements), EN 1060-3 (Supplementary Requirements for Electromechanical Blood Pressure Measuring Systems). -
Page 3: Parts Identification
Parts Identification... - Page 4 Direct current ___________ Serial number ___________ Date of manufacture ___________ Type BF: Device, cuff and tubing are designed to provide special ___________ protection against electric shocks. Appears when measurement is in Measurement is in progress -- progress and flashes when the remain as still as possible.
-
Page 5: Setting The Clock
START button to advance to the correct year. The clock is set to show years 1999 through 2098. If you pass the correct year, continue advancing the clock until you have run through the cycle of years and are back at the correct year. -
Page 7: Preparation For Measurements
Always change all batteries at the same time. If you do not intend to use the device for longer periods, remove the batteries. Only use high quality, leakproof batteries with the specified ratings. Never mix new and old batteries or batteries from different manufactures. - Page 8 • If the START button or clock button is pressed again during pressurization or during the measurement, the pump will stop and the air will be released from the cuff. When pressurization has completed, the automatic exhaust mechanism will gradually reduce the pressure in the cuff and the Measurement in Progress symbol will appear along with the current pressure reading.
- Page 9 Subsequent Measurements If a subsequent measurement is required, turn off the power and turn it on again. When the "0" is displayed, the device is ready for measurement again. Note: Please wait for about 10 minutes before repeating the measurement.
-
Page 10: Notes For Proper Measurements
A normal person's blood pressure varies constantly depending on what you are doing and what you have eaten. What you drink can have a very strong and rapid affect on your blood pressure. -
Page 11: Recalling Memory Data
Recalling Memory Data To access measurements stored in memory, wait until the monitor is in standby mode. Then, press and hold the START button until the display shows the most recent measurement. The display will show all of the stored measurements starting with the most recent and then will return to standby mode. -
Page 12: Transmitting Readings To A Computer
When the monitor receives the open command, it will be in the ready-to-send mode. When the monitor receives the open command again within five seconds, “-“ appears one after another in succession and permission will be given to perform various functions. - Page 13 In preparation for blood pressure measurement, the subject should urinate and should remain relatively still for 5 to 10 minutes before a measurement. Shirts or other garments which fit tightly on the upper arm should be removed before attaching the arm cuff.
-
Page 14: About Blood Pressure
About Blood Pressure What is Blood Pressure? The blood pressure is at its highest levels in the large arteries near the heart and drops off towards the peripheral areas of the circulatory system. The blood pressure varies with the beating of the heart. When the heart contracts, forcing the blood out, the pressure inside the arteries is said to be systolic. -
Page 15: Who Blood Pressure Classifications
Individual blood pressures vary greatly both on a daily and a seasonal basis. These variations are even more pronounced in the hypertensive patient. Normally the blood pressure rises while at work and is at its lowest during the sleeping period.
Need help?
Do you have a question about the UA-767PC and is the answer not in the manual?
Questions and answers