Table of Contents
Advertisement
10
M-SQ PRO 15/18 kVA 60 Hz
2
"SUPER SILENT" EXHAUST SYSTEM
In order to reduce the noise level of the generating set to a min-
imum, an option to reduce the exhaust noise further (especially
exhaust water splashing) is an exhaust/water separator. The
exhaust/water separator allows the cooling water to be ejected
through a line (figure 9, ref. A) separate from the exhaust fumes
and also functions as a goose neck to prevent water from flood-
ing the engine. If the exhaust/water separator is mounted more
than 60 cm above the water level an additional goose neck is not
required.
Figure 9: Super silent exhaust system
Figure 10:
Marine Diesel Generator
A
50
40
If the through-hull exhaust outlet has to be mounted far from
the generating set an exhaust/water separator must definitely
be installed (Total length of the exhaust piping from generator to
top of goose neck (water separator) is more than 3 m.) (ref. to fig.
10).
The sea water from the separator must then run down along the
shortest possible path to the through-hull outlet. Only after the
exhaust/water separator the exhaust hose may have a length of
over 7,5 m (ref. to fig. 10)
WRONG!
X
OK!
50
50
Advertisement
Table of Contents
