Table of Contents
Advertisement
E2C
E2C-JC4AP
Stability indicator
Two, 3.3 dia.
Installation
Connection
E2C-AK4A
Sensor Head
Shielded cable
Amplifier Unit:
E2C-AK4A
Applicable Socket:
100 to 240 VAC
P2CF-11
E2C-JC4A
Sensor Head
Shield
Conductor
16
Operation indicator
Timer switch
Sensitivity adjuster
Caution label (provided with
E2C-JC4AP) (see note 1)
Mounting bracket
(provided with E2C-JC4AP)
Note:
1. Paste the caution label after the sensitivity adjustment of the E2C-JC4AP to prevent mis-operation.
2. The mounting bracket will not be required if the E2C-JC4AP is mounted to DIN tracks.
3. Vinyl-insulated round cable with four conductors, 4.5 dia. (18/0.12); standard length: 2 m
Transistorized
photocoupler
output
P2CF-11
Relay contact
output
Brown (Red)
10 to 30 VDC
Black (White)
NPN open collector output
Blue (Black)
0 V
Mounting Bracket
Operating mode selector
(provided with E2C-JC4AP)
Code (see note3)
E2C-AM4A
Sensor Head
Shielded cable
Amplifier Unit:
E2C-AM4A
Applicable Socket:
P2CF-08
E2C-JC4AP
Sensor Head
Shield
Conductor
1.7 radius
P2CF-08
0 V
PNP
12 to
NPN
output
24 VDC
output
Brown (Red)
10 to 30 VDC
Black (White)
NPN open collector output
Blue (Black)
0 V
Orange (Yellow)
Self-diagnostic output
E2C
Advertisement
Table of Contents
