Olivetti d-Copia 3001MF Service Manual page 249

2K5
3. Remove three screws and remove the HDD
mount.
4. Remove four screws and remove the HDD
mount.
5. Replace the hard disk and Install the hard
disk.
6. Refit all the removed parts.
7. When the hard disk is replaced, perform
maintenance mode U024 to initialize the
hard disk (see page 1-3-19).
1-5-54
Hard disk
Screw
Screw
Screw
Hard disk
Screw
Screw
Service Manual
HDD mount
Figure 1-5-97
Screw
HDD mount
Figure 1-5-98
Screw
Y112040-6