Olivetti d-Copia 3001MF Service Manual page 95

2K5
Maintenance
item No.
Checking messages
U245
Description
Displays a list of messages on the touch panel of the operation panel.
Purpose
To check the messages to be displayed.
Method
1. Press the start key.
2. Select the item to be displayed.
3. Displays the message one by one using cursor up/down keys. Switches the language on the touch
panel using the cursor +/- keys.
When a message number is entered with the numeric keys and then the start key is pressed, the mes-
sage corresponding the specified number is displayed.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Setting the finisher
U246
Description
Provides various settings for the built-in finisher, if furnished.
Purpose
Adjusts the side registration cursor stop position if paper registration is poor or stapling is made outside the
specified area.
Setting
1. Press the start key.
2. Select the desired cursor position.
3. Change the setting using the +/- or numeric keys.
Display
FRONT
REAR
END
4. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-60
Description
Front side registration cursor stop
position
Rear side registration cursor stop
position
Trailing edge registration cursor stop
position
Service Manual
Description
Setting
range
-4 to +4
-4 to +4
-4 to +4
Initial Change in
setting value per step
0 0.566 mm
0 0.566 mm
0 0.566 mm
Y112040-6