Detaching And Refitting The Press Roller - Olivetti d-Copia 3001MF Service Manual

(3) Detaching and refitting the press roller

Follow the procedure below to replace the press roller.
Procedure
1. Remove the fuser unit (see page 1-5-37).
2. Unhook four hooks and remove the fuser
unit cover.
3. Remove two connectors.
4. Remove four screws.
5. Separate the right fuser frame and left fuser
frame.
Y112040-6
Connector
Hook
Connector
Hook
Right fuser frame
Screw
Screw
Service Manual
Hook
Hook
Fuser unit cover
Figure 1-5-76
Screw
Screw
Left fuser frame
Figure 1-5-77
2K5
1-5-41