Fusion-Link Integration; Bep Czone Integration; Power-Pole Anchors - Simrad NSS9 Evo3S Operator's Manual

A maximum of two control heads and four engines is supported.
For more information, refer to the engine manual or engine supplier.

FUSION-Link integration

Compatible FUSION-Link devices connected to the system can be controlled from the
system.
The FUSION-Link devices appear as additional sources when using the audio function. No
additional icons are available.
Refer to "Audio" on page 122 for more information.

BEP CZone integration

The unit integrates with BEP's CZone system used for controlling and monitoring a
distributed power system on your vessel.
The CZone icon is available in the toolbar on the Home page when a CZone system is
available on the network.
A separate manual is provided with your CZone system. Refer to this documentation and to
the unit's Installation manual for how to install and configure the CZone system.
CZone dashboard
When the CZone is installed and configured, an additional CZone dashboard is added to the
instrument panels.
You switch between a panel's dashboards by swiping left or right on the panel or by
selecting the dashboard from the menu.
Editing a CZone dashboard
You can customize a CZone dashboard by changing the data for each of the gauges.
Available editing options depend on the type of gauge and which data sources that are
connected to your system.
For more information, refer to "Instruments" on page 119.

Power-Pole anchors

Power-Pole anchors, which can be controlled by the C-Monster Control System installed on
your boat, can be controlled from the unit. To control the Power-Poles, you pair the Power-
Poles with the unit using Bluetooth wireless technology available in both products.
Power-Pole controls
When Bluetooth is enabled, the Power-Pole button becomes available in the control bar.
Select it to display the Power-Pole controller.
For pairing Bluetooth devices, refer to "Bluetooth devices" on page 131.
If you are pairing dual Power-Poles, also review "Pairing with dual Power-Poles" on page 152.
When the Power-Pole controller is opened, the system connects to paired Power-Poles.
When the connection is confirmed, the control buttons are enabled.
The Power-Pole controller displays control buttons for each Power-Pole that is paired to the
unit.
Single press the AUTO buttons to raise and lower the Power-Poles automatically all the way
up and down. The manual up and down buttons raise and lower the poles as high or low as
you want.
151
Integration of 3 party devices| NSS evo3S Operator Manual