Routes - Simrad NSS9 Evo3S Operator's Manual

Moving a waypoint
A waypoint can be moved from the position if active and if the waypoint is selected in the
menu.
To move a waypoint to a new position, select the move waypoint menu option and then
select the new waypoint location on the image.
To save the waypoint at the new position, select the finish moving menu option
Edit a waypoint
You can edit all information about a waypoint from the edit waypoint dialog.
The dialog is activated by selecting the waypoint, and then selecting edit from the menu.
The dialog can also be accessed from the waypoints tool on the home page.
Deleting waypoints
You can delete a waypoint by selecting the delete menu option when the waypoint is
activated on the panel.
You can also delete a waypoint by selecting it in the routes dialog and then deleting it in the
edit waypoint dialog.
You can delete all waypoints or waypoints by symbols from the system using the waypoints
dialog.
You can delete MOB waypoints the same way.
You can back-up your waypoints, routes and tracks before deleting them, refer to "Maintenance"
on page 144.
Waypoint alarm settings
You can set an alarm radius for each individual waypoint you create. The alarm is set in the
Edit Waypoint dialog.
Ú Note:
The waypoint radius alarm must be toggled ON in the alarm dialog to activate an
alarm when your vessel comes within the defined radius. For more information, refer to
"Alarm dialogs" on page 143.

Routes

About routes
A route consists of a series of routepoints entered in the order that you want to navigate
them.
When you select a route on the chart panel it turns green, and the route name is displayed.
Creating a new route on the chart panel
1.
Activate the cursor on the chart panel
2.
Select the new route option from the menu
3.
Position the first waypoint on the chart panel
4.
Continue positioning new routepoints on the chart panel until the route is completed
5.
Save the route by selecting the save option in the menu.
Edit a route from the chart panel
1.
Select the route to make it active
2.
Select the route edit option in the menu
3.
Position the new routepoint on the chart panel:
Waypoints, routes, and tracks | NSS evo3S Operator Manual
41