Dimm Installation; Dimm Removal - Supermicro SuperServer 5039C-I User Manual

DIMM Installation

1. Insert the desired number of DIMMs
into the memory slots based on the
recommended DIMM population table on
page 29.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Press the notches on both ends of the
module straight down into the slot until the
module snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Removal

Press both release tabs on the ends of the
DIMM socket to unlock it. Once the DIMM
module is loosened, remove it from the
memory slot.
Chapter 3: Maintenance and Component Installation
ASpeed
AST2500
LEDBMC
SP1
BT1
USB2/3
JBT1
USB4/5
Intel
C242
M.2 PCI-E 3.0 X4
JTPM1
I-SATA0 I-SGPIO1
LE3
I-SATA1
I-SATA2
JSD1
I-SATA3
JSD2
Release Tabs
27
COM1
VGA
LAN2 LAN1
IPMI_LAN
USB0/1
Intel
i210
X11SCL-F
REV:1.01
DESIGNED IN USA
CPU
MH11
MH10
MEGERAC
LICENSE
JF1
MAC CODE
BAR CODE
LEDPWR
JSTBY1
Notches
Press both ends
straight down into
the memory slot.