Installing The Imagepress Server - Canon imagePRESS Server G200 Service Manual

10.
CAUTION:
• Be sure to turn over the 2 Lock Levers, and push
in the Main Controller PCB 2.
• When installing the screws, install the lower screw
first and then the upper one.
• Be sure to perform the work in the order from 1 to
5 in the figure because the connector of the Main
Controller PCB 2 may not be connected.
2x
11.
NOTE:
The other end of the Interface Cable will be connected in

"Installing the imagePRESS Server".

12.
2x
69
7. INSTALLATION PROCEDURE
CAUTION:
When installing the Box Left Cover, be careful not to
trap cables.
4x
Installing the imagePRESS
Server
1.
2x