Canon imagePRESS Server G200 Service Manual page 25

16
9
MS
MS
No. Item
1 HDD data connector (SATA0)
2 Security chip (J23)
3 Battery (CR1)
4 Printer interface board (PCIE x16)
5 Power button pins (J11)
6 DIMM-A0
NOTE:
Any connectors not listed are not used.
■ Removing the motherboard
Before you remove the motherboard, you must remove:
• All boards installed on the motherboard
• All cables connected from other components to the motherboard (these include both motherboard power cables, chassis fan
cable, HDD data cable, 10-pin power button cables, and service board cable)
IMPORTANT:
Follow standard ESD precautions while handling the motherboard and all components. For details, see
page 3.
● To remove motherboard components from the motherboard
MS
13
10
8
5
Diagram of the motherboard
No.
7 DIMM-B0
8 Crossover Ethernet port / Type A
USB3.0 ports (x2)
9 Type A USB2.0 connector (x2)
10 Type A USB2.0 ports (x2) / Network
port (RJ-45)
11 CPU and cooling assembly
12 24-pin power connector (J24)
14
11
4
3
Item
20
3. REPLACING PARTS
MS
15
7
6
12
MS
2
1
MS
No. Item
13 4-pin power connector (PWRCONN1)
14 CPU fan connector (CPU FAN J16)
15 FRONT FAN connector (J30)
16 Service board connector (EFI GPIO
Header J4)
MS Mounting screws
"Precautions " on