Canon imagePRESS Server G200 Service Manual page 17

No.
1 Type A USB 2.0 ports (x2)
2 Type A USB2.0 ports (x2)
3 Type A USB3.0 ports (x2)
4 Printer interface connector
5 Power connector
During startup, the imagePRESS Server advances through a standard diagnostic sequence. Each diagnostic code flashes rapidly
on the LED display during this sequence, until the imagePRESS Server reaches Idle. At Idle, the LED display shows the 00 code.
NOTE:
The LED display is mounted in upside-down orientation.
1
2
3
4
5
imagePRESS Server connector panel
Item
6
7
8
9
No.
6 Network port (Upper RJ-45)
7 Crossover Ethernet connector
8 Duct
9 Power switch
12
3. REPLACING PARTS
Item