Canon imagePRESS Server G200 Service Manual page 46

Configuration settings not available
for backup in Configure
VDP/FreeForm resources
Paper Catalog
■ To access the Fiery System Restore from Command WorkStation
1. Start Command WorkStation and login to the imagePRESS Server with Administrator privileges.
The default Administrator password is Fiery.1 (case-sensitive), but the site administrator may have changed the password.
2. From Server menu, select Device Center.
3. Click Tools on the left side, and then click Fiery System Restore.
The Fiery System Restore will be displayed on a default web browser window.
■ To access the Fiery System Restore features from WebTools
1. From a client computer, start a web browser and enter the IP address or the DNS name of the imagePRESS Server.
2. Select Fiery System Restore tab.
The available features are listed under Fiery System Restore section.
You must log in to the system as a system administrator before performing any of the backup/restore process.
■ To setup automatic scheduled backup
1. In the Fiery System Restore, select Schedule Backup.
2. Select Enable automatic backup, and select when you want to start the backup process on the imagePRESS Server.
NOTE:
The backup process takes more than an hour to complete and it requires the imagePRESS Server to be Idle status. If the
imagePRESS Server is not in Idle status, the backup process does not start.
3. Click Save.
Backing up the system configuration"To back up the system configuration" on page 39
Export Paper Catalog in CWS
http://help.efi.com/cws/6.0/en-us/GUID-DEE38FC8-EB93-41E9-
AD21-24E4B333AE2A.html
NOTE:
Only an Administrator can access PaperCatalog Setup.
1. Click the Export icon and choose Export All....
If you only want to export some of the media entries, you can select multiple entries in
the Paper Catalog and choose Export Selected.... You can Shift-click to select sequen-
tial entries, or Ctrl-click to select nonsequential entries.
2. Navigate to the location on your computer or network where you want to save the ex-
ported database file.
3. Enter a name for the database file; then click Save.
41
4. INSTALLING SYSTEM SOFTWARE
Alternate procedure