Maintenance Section
Tilt Cylinders - Check, Adjust,
Lubricate
Chassis Pivot Eyebolts
Typical Example
1. Lubricate two fittings for the pivot eyebolts, one
on each tilt cylinder.
2. Check the pivot eye pins for loose retainer bolts
and wear.
Mast Pivot Eyes
Typical Example
1. Lubricate two fittings for the mast pivot eyes,
one on each side of the mast.
2. Check the pivot eye pins for loose retainer bolts
and wear.
Crosshead Rollers - Inspect
1. Operate the mast through a lift cycle. Watch the
chains move over the crosshead rollers. Make
sure the chain is tracking over the rollers
properly.
Typical Example
2. Check for damaged crosshead rollers, guards
and retainer rings.
Parking Brake - Test, Adjust
See topic, "Parking Brake - Test, Adjust "in" First
50-100 Service Hours or a Week."
Drive Axle Oil (OCDB) - Change
See topic, "Drive Axle Oil - Change" in "First 50-100
Service Hours or a Week".
230