Operator Restraint System (If Equipped) - Doosan D60S-7 Operation & Maintenance Manual

Safety Section
Operator Restraint System
(If Equipped)
Warning Signs and Labels
Your DOOSAN lift truck has the following tip over
warning decals.
Make sure that you can read all safety signs. Clean
or replace these if you cannot read the words or see
the pictures. When cleaning the labels use a cloth,
water and soap. Do not use solvent, gasoline, etc.
You must replace a label if it is damaged, missing or
cannot be read. If a label is on a part that is replaced,
make sure a new label is installed on the replaced
part. See you DOOSAN Lift Truck dealer for new
labels.
The most effective method of preventing serious
injury or death to yourself or others is to familiarize
yourself with the proper operation of the lift truck, to
be alert, and to avoid actions or conditions which
can result in an accident.
WARNING
Tip over can occur if the truck is improperly
operated. In the event of tip over, injury or death
could result.
The "Survive in tip over" warning is located on the
overhead guard. It shows the proper use of the
operator restraint system.
Seat Adjustment
Move the lever, slide the seat to the desired position,
and release the lever.
Adjust the seat before operating the lift truck. After
adjusting, set the seat to make sure it is properly
locked. Do not adjust the seat while the truck is in
motion.
Do not place your hand or fingers under the seat.
Injury may occur as the seat moves up and
down.
18
WARNING