10 Hour / Daily Service; Grease Front Attachment Pins (For First 100 Hours); Inspect All Tires For Correct Tire Pressure And Signs Of Damage Or Abnormal Wear; Check Engine Oil Level - Doosan DL200 Operation And Maintenance Manual

10 HOUR / DAILY SERVICE

Grease Front Attachment Pins
(for First 100 Hours)
Fittings are greased daily, or every 10 hours, for the
NOTE:
first 100 hours of operation to comply with new
machine break-in requirements. After that, greasing
must be done every 50 hours. If bucket is being used
in water, grease fittings immediately after machine is
removed from water. Follow procedure printed under
the 50 hour maintenance interval "Grease Front
Attachment Pins" on page 4-32.
Inspect All Tires for Correct Tire
Pressure and Signs of Damage or
Abnormal Wear
1. Inflate tires to proper operating pressure for working
conditions. See "Tires" on page 4-85

Check Engine Oil Level

When checking level using a dipstick always remove
NOTE:
and wipe it clean before making final level check.
1. Check level of engine oil every day before starting
engine.
2. Remove engine oil dipstick (1, Figure 14). Oil level
must be between "LOW" and "FULL" marks.
If oil is above "HIGH" mark on dipstick, some
NOTE:
must be drained to return oil to proper level.
3. To add oil, remove engine oil fill cap (2, Figure 14).
Inspection, Maintenance and Adjustment
1
Figure 14
Figure 15
2
FG006238
HAOC280L
OP000509
4-23