Table of Contents
Advertisement
Voicemail voltage detection
There are 3 options to set the voicemail voltage
detection on the telephone base.
To disable the voicemail voltage detection
1. Remove the faceplate and overlay if they are
on the telephone base. Then, remove the
sticker on the telephone base.
2. Use a narrow object to unplug all the jumpers
from the telephone base.
3. Place the sticker back in place.
To set the voicemail voltage detection by
the periodic low voltage pulse detection
method
1. Remove the faceplate and overlay if they are
on the telephone base. Then, remove the
sticker on the telephone base.
2. Use a narrow object to unplug all the jumpers
from the telephone base. Then, plug the
jumpers into
,
3. Place the sticker back in place.
To set the voicemail voltage detection by
the steady high voltage and periodic high
voltage pulse detection method
1. Remove the faceplate and overlay if they are
on the telephone base. Then remove the
sticker on the telephone base.
2. Use a narrow object to unplug all the jumpers
from the telephone base. Then plug the
jumpers into
,
3. Place the sticker back in place.
and
.
and
.
Speed Dial keys
There are 11 programmable guest-service
(Speed Dial) keys. Program these keys to
automatically dial telephone numbers or to
activate telephone system features. When you
program a Speed Dial key which is already
prorgammed, the new number will override
the old one.
To program a Speed Dial key
1. Remove the faceplate and overlay if they
are on the telephone base. Lift the handset,
then press the recessed PROGRAM key.
2. Press the desired Speed Dial key where the
telephone number is to be stored. You hear
a beep.
3. Enter the telephone number (up to 21 digits
in length).
• To insert a pause in the stored number, press
the recessed PAUSE key.
4. Press the recessed PROGRAM key again to
save. You hear a beep as confirmation.
Jumper
EN - 10
Advertisement
Table of Contents
