Before Recording; Recording - Sanyo AWM-660 Instruction Manual

NOTES:
• Always close the cassette door if the cassette isn't be used for a
long time.
• Use normal tapes (TYPE 1).
• Endless tapes cannot be used.
• Do not use C-100 (or longer) tapes. They may jam in the
mechanism.
Pause
Press [PAUSE] to temporarily stop playback or recording. Press it
again to resume operation.
PAUSE
K
Accidental erasure prevention tabs
(for protecting valuable recordings)
Accidental erasure can be prevented by breaking out the tabs on
the end of the cassette tape (where the tape is not exposed) using
a screwdriver or similar implement.
If a tab is broken out in error and you wish to re-record the tape,
simply block the tab hole using adhesive tape and the tape can be
used for recording again.
Preparation
Load a blank cassette into the cassette holder.
Recording compact discs (Synchronous recording)
4 5
M A D C K
2
3
1. Select the "CD" function.
2. Load the disc to be recorded.
• For programmed recording, program the material in
advance (as described under "PROGRAMMED PLAY").
3. Select the track number to be recorded if required.
• For programmed recording, this step is unnecessary.
4. Press [REC]. CD recording starts.
REC
M
AWM-660/US Eng page 13
Fast forward and Rewind
Press [FFWD] or [REW]. When the desired location has been
reached, press [STOP/EJECT].
The tape stops automatically at the end of the tape.

BEFORE RECORDING

Break out tab A for side A.
Break out tab B for side B.
Side B

RECORDING

• When you want to record music as you listen, press
[REC]. Recording starts automatically from the beginning
of the track.
5. Press [STOP/EJECT] at any time to stop recording.
When the end of the tape is reached, the CD player and deck
stop automatically.
Recording from the tuner
1. Tune in the radio station to be recorded.
2. Press [REC] to start recording.
3. Press [STOP/EJECT] at any time to stop recording.
When beat is heard
Beat (a high-pitched noise) may sometimes be heard during the
recording of radio broadcasts. If this occurs, while pressing
[MEMORY] down, press [TUNING +] for at least 1 second to se-
lect "bc-1" or "bc-2". Select the setting that gives the best result.
1
-E12-
4/16/04, 5:40 PM
REW FFWD
D C
Side A
MEMORY
TUNING +