Sanyo AWM-660 Instruction Manual page 5

To an AC 120V outlet
Speakers terminals (SPEAKERS)
To achieve proper stereo reproduction, identical connections must
be made at the speakers and this unit.
Connect the connector of the left speaker cable to the SPEAKERS
L jack.
Connect the connector of the right speaker cable to the SPEAK-
ERS R jack.
If you have difficulty inserting the speaker cable connector, turn it
over and reinsert it.
Headphones jack (PHONES)
Connect a pair of stereo headphones with miniplug (not available
from SANYO) to the PHONES jack (the back of the unit) for moni-
toring or for private listening. The speakers are automatically dis-
connected when headphones are connected.
Power supply
Connect the power cord to a 120V AC 60Hz outlet. This unit is
equipped with a polarized plug. If you have difficulty inserting the
plug, turn it over and reinsert it. If the unit will not be used for a long
time, disconnect the AC plug from the AC outlet.
NOTES:
• Before plugging the power cord into an AC outlet, make sure
that all the connections have been made.
• The system is not disconnected from the AC power unless the
power cord is unplugged from the AC outlet.
AWM-660/US Eng page 5
R ch speaker L ch speaker
AM
FM
LOOP
ANT
SPEAKERS
(4 MIN.)
PHONES
R L
EXT. ANT
AM loop antenna
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION:
POUR ÉVITER LES CHOC ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE
LA PRISE ET POUSSER JUSQU' AU FOND.
-E4-
4/16/04, 5:40 PM
FM antenna
Need help? Call
1-800-813-3435