Technical Specifications - Presys T-1200PH Technical Manual

PRESYS
 Instruments
Another way of performing automatic documented calibrations is by means of
ISOPLAN Calibration Software for PC/Windows
communication to connect the computer to the dry block. With ISOPLAN it is possible to
register sensors and instruments of a factory, generate work orders, create and print
calibrations certificates and reports, that is, it brings all advantages of computer data
management to the calibration environment.
T-1200PH have also many other features, such as:
 The electric signal calibrator is independent from the dry block function.
 Internal buzzer beeps when the temperature reaches the desired value.
 Keypad that eases the operation and configuration of the calibrator.
 Graphic liquid crystal display to present big-size digit numbers.
 Thermo-element reading scaled to ITS-90 or IPTS-68.
 Internal regulated 24 vdc power supply for 2-wire transmitters.
 Internal rechargeable battery and battery charger included in the electric signal
calibrator.
 Independent circuitry for overtemperature protection and safety.
 Insert to choose, carrying case, strap and test leads included. If the insert is not
specified, it will be provided the insert type BP06.

1.1 - Technical Specifications

Operating Range
Power Supply
Resolution
Accuracy
Stability
Power Consumption
Heating Rate
Cooling Rate
Calibration Volume
Standard Insert coming with
the furnace
Homogeneity
Dimensions (H,W,D)
Weight
Warranty
TM , which uses RS-232 or RS-485 serial
50 ºC (122 °F) to 1200 °C (2192 °F)
110 Vac or 220 Vac 50/60Hz, according to order code.
45 minutes (100 ºC to 1200 ºC)
5 h (1200 ºC to 200 ºC)
 34 mm / 130 mm depth
2 holes of  6 mm and 2 holes
of  ¼" x 80 mm depth
215 x 390 x 310mm
T-1200PH
0.1 ºC or 0.1 ºF
 3.0 °C
 0.2 ºC
2300 W
 0.2 °C
10,3 kg
1 year
T-1200PH
Page 2