Presys T-1200PH Technical Manual page 3

Avoid electric shock risk when touching the equipment:
- Use only suitable power cable with earth connection;
- Never power the equipment to the mains socket with no earth connection.
High voltage is present inside this equipment.
It can cause great damages and injuries.
Do not make any repair service inside the equipment without removing
the plug from the supply.
Much electromagnetic noise can cause instability to the equipment.
The equipment is provided with electromagnetic interference filters that protect
not only the mains but also the equipment itself against noise. These filters have no
function if the unit is not earthed properly.
High temperatures are achieved in this equipment.
Risk of fire and explosion are present in case safety measures are not taken.
Sign by means of warnings the hazardous areas at high temperatures.
Do not place the dry-block on inflammable surfaces or even on materials that
can be deformed due to high temperatures.
Do not obstruct any air-vent to avoid risk of fire in the equipment.
The instrument described in this technical manual is intended to be used in a
specialized technical area. The user should be responsible by its configuration and the
parameter values entered. Factory warns about risks of personal injury or ambient
damage as a result of its incorrect use.
Do not raise the setpoint in steps higher than 500 °C in order to increase
heater lifetime.
WARNING!
WARNING!
WARNING!
WARNING!
CAUTION!
CAUTION!