Locomotive Switch Locations - Lionel SD38 Owner's Manual

Locomotive basics

Locomotive switch locations

T
he functions of your locomotive's switches are outlined below. Refer to Figure 4 for the location
of the switches. The instructions below are specific to this particular locomo-
tive; note that available features (and switches) may differ from other loco-
motives and locomotive sets.
Smoke Unit Switch (SMK/NO SMK)
Used to turn the smoke unit function on and off.
Command Reverse Unit Switch (RUN/PGM)
Used to assign an ID# and to reprogram the locomotive for LEGACY and Command operation
when the switch is in the PGM position. Also used to "lock" your powered locomotive in a single
direction, or neutral, in conventional operation when the switch is placed in the PGM position.
Bluetooth Switch
Manually turn on/off power to Bluetooth module.
Command reverse unit
switch
Figure 4. Locomotive switch locations
Volume control
knob
RUN PGM
SMK NO SMK
ON BLUETOOTH OFF
Smoke unit
switch
Bluetooth switch
8
REMOVE COVER