Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Havis TC-106
Summary of Contents for Havis TC-106
- Page 1 Owner’s Manual Havis Tablet Docking Stations and Tablet Cases DS-TAB-100 Series DS-TAB-101 DS-TAB-102 DS-TAB-104 TC-100 Series TC-101 TC-102 TC-104 TC-105 TC-106 TC-107 TC-109 Havis, Inc. 75 Jacksonville Road Warminster, PA 18974 DS-TAB-100^TC-100-SERIES_OMN_05-20...
-
Page 2: Before Beginning
Before Beginning Havis is pleased to provide this Owner’s Manual to aid in the proper installation and use of the DS-TAB-100 Series Docking Stations and TC-100 Series Tablet Cases. For questions regarding the set-up of your DS-TAB-100 Series Docking Station or TC-100 Series Tablet Case, please contact Havis at 1-800-524-9900 or visit www.havis.com for additional product support and information. -
Page 3: Specifications
Manufacturers Address: 75 Jacksonville Road, Warminster, PA 18974 USA Declares under our sole responsibility that the product: Product name: Havis Docking Station For X Tablets, where ‘X’ denotes tablets listed in product compatibility matrix. Model: DS-TAB-10X, where ‘X’ may be any alphanumeric character and which describes product options. - Page 4 Parts Included (DS-TAB-100 Series) Docking Station Barrel Lock Release Handle Alignment Posts Latch Hook LED Power Indicator Docking Connector Front Hooks Ports Strain Relief and Cable Routing Channels Mounting Holes (x4) (VESA 75mm Hole Pattern) Power Cable (DS-DA-325)
- Page 5 (DS-TAB-100 Series) (continued) Parts Included Hardware Kit (HWK-0042) This Hardware Kit includes: 1. Zip Ties (5) 2. Keys (2) 3. M4 x 0.7 x 12mm Long Screws (5) 4. Flat Washers, M4 (5) 5. Lock Washers, M4 (5) ...
-
Page 6: Installation
(Hardware Kit Item 4), and four (4) Lock Washers, M4 (Hardware Kit Item 5), secure the Docking Station to device. Torque screws to 15 in-lbs (1.7Nm) ± 10% A) Havis Desktop Stand installation (sold separately, Part # DS-DA-218). Washer, M4 Lock Washer, M4 M4 x 0.7 x 12mm... -
Page 7: Cable Management
(DS-TAB-100 Series) Cable Management 1) Tip the Docking Station to a position that is comfortable to work with. 2) Install all cables that are necessary for computing needs. 3) Use Zip Ties (Hardware Kit Item 1) and the Strain Relief Points to secure cables and reduce risk of accidental disconnects. - Page 8 Parts Included (TC-100 Series) Tablet Case (Part ID TC-101 shown assembled with iPad 10.5”) Audio Port Shoulder Strap Clip Mounting Points Docking Latch Hook Pocket Kick Stand* Stylus Holder* Docking Alignment Pockets shown in extended position Hand Strap* (shown assembled) Docking Connector Charge Port * Not included with all Tablet Case models...
- Page 9 (TC-100 Series) (continued) Parts Included Tablet Case Front Tablet Case Assembly Back Tablet Case Assembly Hardware Kit (HWK-0055) This Hardware Kit includes: 1. M2.5 , 6mm long Washer Head Screws (12) 2. T8 Torx Bit, ¼” Hex Shank (1) Tools required for installation: •...
- Page 10 (TC-100 Series) Installation IF A SCREEN PROTECTOR IS BEING USED ON TABLET (NOT INCLUDED), ASSEMBLE BEFORE BEGINNING TABLET CASE INSTALLATION. 1) Assemble hand strap by guiding each end through the slots on the Back Assembly of Tablet Case. Adjust loop size as desired and secure Velcro closures. 2) Insert the connector from the Back Assembly of the Tablet Case into your tablet (Apple iPad Pro 10.5”...
- Page 11 (TC-100 Series) Installation (continued) 3) Place the tablet into the Back Assembly of the Tablet Case, ensuring the connector cable is routed properly, being careful not to pinch cable. (Refer to Instructions included with your specific TC-100 Series Tablet Case) 4) Place the Front Assembly of the Tablet Case on the Back Assembly.
- Page 12 (TC-100 Series) Installation (continued) 5) Holding the two Assemblies together, carefully turn the Tablet Case over. Insert all the necessary screws (Hardware Kit Item 1) and tighten with provided T8 Torx Bit (Hardware Kit Item 5). Torque screws to 4 in-lbs (0.45Nm) ± 10%. CAUTION: DO NOT OVERTIGHTEN SCREWS OR DAMAGE TO TABLET CASE MAY OCCUR.
- Page 13 (TC-100 Series) Tablet Case Features Some models of Tablet Cases include a Power Cable for charging your tablet when not docked. Plug into the Charge Port on the Bottom Assembly of Tablet Case. In the event your Table Case model does not include a Power Cable, the supplied cable from your tablet manufacturer can be used.
- Page 14 (TC-100 Series) Tablet Case Features (continued) Stylus Holder on Bottom Assembly of some Tablet Case models will accommodate most stylus sizes. Slide your stylus into the channel and under the Stylus Holder. Accessing your tablet’s audio jack may require the use of the an Audio Jack Extender. 3) Optional Shoulder Strap (Part # DS-DA-107) can be attached using the Shoulder Strap Clips and Screws, included with Shoulder Strap.
-
Page 15: Operation - Docking
Operation - Docking DO NOT FORCE TABLET CASE INTO DOCKING STATION. IF THERE IS RESISTANCE, CHECK ALIGNMENT OF TABLET CASE ON DOCKING STATION. NOTE: Ensure a proper connection by aligning the Tablet Case’s Alignment Pockets with the Docking Station’s Front Hooks Front Hooks on the Alignment Sockets on the bottom piece DS-TAB-100 Series Docking Station... - Page 16 Operation – Docking (continued) 3) Pivot Tablet Case into the Docking Station until the Docking Station’s Latch Hook engages with the Latch Hook Recess on the Tablet Case. A click will be heard when docked correctly. Latch Hook engaging with Tablet Case (shown without a tablet).
-
Page 17: Operation - Undocking
Operation - Undocking 1) If previously locked, unlock Docking Station using the supplied key. 2) While holding Tablet Case with one hand, lift the Release Handle on the top of Docking Station. 3) While lifting the Release Handle grab the side of Tablet Case, rock the top forward and carefully lift out of Docking Station, top end first. -
Page 18: Related Products
Related Products Havis offers a wide variety of accessory products specifically for use with your Docking Station. For more information or to order, please visit www.havis.com. C-MD-401/402 and PKG-FAM-118 Universal Rugged Articulating Phone & Tablet Mounts Light weight mounts are an ideal mobile solution for tablet,...