Inspection And Adjustment Of Flange-Back (Body-Back) - Nikon D7000 Repair Manual

Inspection and adjustment of flange-back (body-back)

• Refer.to." ② Models WITH rear body" of "Inspection and adjustment of flange-back (body-back)" of
D/SLR.ADJUSTMENT.Separate.Volume.①.for.details.
Rotational.direction/divisions.of.scale:.Turn.the.index.circle.by.17.divisions.of.scale.in.the.
direction.of.the.arrow.so.that.the.needle.is.on."0.17.mm".position.
<Standard>.(Body-back).distance:.48.5mm
Caution:.For.some.bodies,.the.washers.are.already.put.(1).on.the.face.of.the.camera-body.for.mounting.the.image.
(1)The face of camera body for mounting the image sensor unit: To adjust the height of the camera body
※.In.case.of.disassembling/replacing.the.image.sensor.unit,.put.the.washers.back.to.the.original.positions.
(2)The attaching face of image sensor unit: To adjust the height of the image sensor unit
※.Remove.the.wahsers.when.the.image.sensor.unit.must.be.replaced.
J19004-1
Dial.indicator.and.stand
NICS
sensor.unit,.and.(2).on.the.attaching.face.of.the.image-sensor.unit...In.this.case,.there.are.marks.at.the.
following.two.types.of.marking.position.
Tool (device)
J18001-1
-0.025mm
+0.005mm
Marking.position
Body-back.focus.gauge
- A44 ・ D7000 -
./parallelism:.0.015mm.or.less
Color.of. Sub-
Part.No.
mark No.
Blue 63A 6K050-084
Red 63B 6K050-085-1 T.=.0.1
Green 63C 6K050-086
Marking position
Color.of. Sub-
Part.No.
mark No.
Blue 63A 6K050-084
Red 63B 6K050-085-1 T=0.1
Green 63C 6K050-086
VBA29001-R.3814.A
Thickness.of.
washer (mm)
T.=.0.02
T.=.0.06
Thickness.of.
washer (mm)
T=0.02
T=0.06