VBA29001-R.3814.A
Aperture.control.unit
・ Mount the aperture control unit (#B242).
・ Tighten the four screws (#621).
#B242
#621×4
・ Attach the FPC by fitting the bosses in the holes.
・ Solder.the.two.wires.
・ Attach the tape [TA-0015 (8.5×17)].
[Black]
[Red]
○= Boss
TA-0015 (8.5×17)
- A20 ・ D7000 -
NICS