Installing The Main Silencer; Changing The Glass Fiber Yarn Filling In The Main Silencer - KTM 350 EXC-F 2019 Owner's Manual

12.31

Installing the main silencer

12.32

Changing the glass fiber yarn filling in the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the glass fiber yarn escape and the damper "burns" out.
Not only is the noise level higher, the performance characteristic changes.
–
Detach spring
Spring hook (5030501700004)
–
Remove screws
K00575-10
–
Position the main silencer. Mount screws
tighten yet.
–
Attach spring
Spring hook (5030501700004)
–
Tighten screws
Guideline
Remaining screws,
chassis
K00575-11
Preparatory work
–
Remove the main silencer. (
SERVICE WORK ON THE CHASSIS 12
1
.
2
and take off the main silencer.
1
2
.
1
.
M6 10 Nm (7.4 lbf ft)
p. 80)
but do not
81