Checking The Rubber Grip - KTM 350 EXC-F 2019 Owner's Manual

12.43

Checking the rubber grip

Main work
–
Check throttle cable routing.
Both throttle cables must be routed, side by side, on the
back of the handlebars and above the fuel tank bracket, to
the throttle valve body. Both throttle cables must be secured
behind the fuel tank contact area rubber band.
» If the throttle cable routing is not as specified:
–
Correct throttle cable routing.
E00392-01
Finishing work
–
Install the fuel tank.
–
Mount the seat. (
–
Check the rubber grips on the handlebar for damage, wear,
and looseness.
Info
The rubber grips are vulcanized onto a sleeve on the
left and onto the handle tube of the throttle grip on the
right. The left sleeve is clamped onto the handlebar.
The rubber grip can only be replaced with the sleeve or
the throttle tube.
401197-01
» If a rubber grip is damaged, worn, or loose:
–
Change the rubber grip.
–
Check that screw
Guideline
Screw, fixed
grip
A
Diamond
K00547-10
SERVICE WORK ON THE CHASSIS 12
( p. 84)
p. 77)
1
is firmly seated.
M4 5 Nm (3.7 lbf ft)
must be located at the top.
Loctite ® 243™
91