15 ELECTRICAL SYSTEM
15.5
118
E00362-10
Changing the fuses of individual power consumers
Info
The fuse box containing the fuses of individual power consumers is located under the seat.
E00394-10
E00395-10
–
2
Take off protection caps
–
Remove faulty main fuse
Info
You can recognize a faulty fuse by a burned-out fuse
A
wire
.
4
A spare fuse
is located in the starter relay.
–
Install a new main fuse.
Fuse (58011109120) (
–
Check that the electrical equipment is functioning properly.
Tip
Insert a spare fuse so that it is available if needed.
–
Mount the protection caps.
–
Mount the starter relay onto the holder and route the cable.
Finishing work
–
Mount the seat. (
p. 77)
Preparatory work
–
Press and hold the kill switch
the engine stops.
–
Remove the seat. (
p. 76)
Main work
–
1
Pull the EFI control unit
one side.
–
2
Open fuse box cover
.
–
Remove the faulty fuse.
Guideline
(All EU models)
Fuse 1 ‑ 10 A – EFI control unit, lambda sensor, com-
bination instrument, combination switch (optional), fuel
injection, diagnostics connector, fuse 4
.
3
.
p. 153)
while the engine is idling until
from the holder and hang it to