KTM 350 EXC-F 2019 Owner's Manual page 121

(EXC‑F AU, All BR models)
Fuse 1 ‑ 10 A – EFI control unit, combination instru-
ment, combination switch (optional), fuel injection,
diagnostics connector, fuse 4
Fuse 2 - 10 A - high beam, low beam, position light, tail
light, license plate lamp
Fuse 3 - 10 A - radiator fan (optional), horn, brake light,
turn signal
Fuse 4 - 5 A - fuel pump
Fuses res - 10 A - spare fuse
Info
You can recognize a faulty fuse by a burned-out fuse
A
wire
Warning
Fire hazard Incorrect fuses overload the electrical sys-
tem.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
–
Insert spare fuse with the correct rating only.
Fuse (75011088010) (
Fuse (75011088005) (
Tip
Replace the spare fuse in the fuse box so that it is
available if needed.
–
Check that the power consumer is functioning properly.
–
Close the fuse box cover.
–
Mount EFI control unit
E00394-10
Finishing work
–
Mount the seat. (
ELECTRICAL SYSTEM 15
.
p. 153)
p. 153)
1
on the holder.
p. 77)
119