Machine Description And Items Delivered; General Safety Instructions - Fieldmann FDP 200712-E Manual

EN 8
Machine description and items delivered | General safety instructions
3. MACHINE DESCRIPTION AND ITEMS
DELIVERED
The jig saw is designed for cutting the wood, iron, nonferrous metals and plastics, using a standard saw blade.
Before using the jig saw, familiarize yourself with all the operating features and safety requirements. (See Fig. 1)
1. Dust extraction outlet
2. Speed adjustment dial
3. ON/OFF switch trigger
4. Lock-on button
5. Transparent guard
6. Blade clamp
Items Delivered
Remove all contents from the box and inspect to ensure no damage was incurred during shipping, and that the
items listed below are included.
Jig saw
Parallel edge guide
2 saw blade
Warranty card
Instruction Manual
Should the components be missing or damaged, contact the dealer of the machine.

4. GENERAL SAFETY INSTRUCTIONS

Please read these safety instructions carefully, remember them and keep them in a safe
place
WARNING!
When using electric machinery and power tools, it is important to abide by and adhere to the following safety
instructions for reasons of protection against injury caused by electric current, injury of persons and risk of
starting fi res. The term "power tools" used in the instructions below refers to power tools that are plugged into
a power supply (by a power cord) as well as tools running on a battery pack (cordless). Keep all warnings and
instructions for further use.
Work environment
Keep the work area clean and well lit. Untidiness and dark places on the job site are usually causes of
accidents. Store tools that are not used.
Do not use power tools in an environment where there is risk of starting a fi re or explosion; this refers to
places where there are fl ammable liquids, gases or dust. Sparks form on the power tool's commutator,
which can cause dust or fume ignition.
7. Guide roller
8. Orbital switch knob
9. Base plate
FDP 200712-E