Installation; Mounting The Imprinter - Fujitsu fi-475PR User Manual

3. Installation

(1) Mounting the Imprinter

Mount the imprinter as follows:
1
Prepare a Phillips screw driver.
2
Turn off the power switch of the scanner and
disconnect the power cable.
3
Unfasten the two screws near the eject rollers of the
ADF.
(1)
6
Connect the imprinter cable between the imprinter
(side) and the scanner (back).
When removing the imprinter, reverse the mounting
procedures.
4
(1) While pushing the lower part of the
imprinter against the scanner, (2) hang the
arms on the ADF unit and push down the
ends of the arms to mount the imprinter on
the scanner.
(2)
5
Secure the imprinter unit with the two screws
removed at procedure 2.
7
Screw