Replacing Cartridges; To Remove A Cartridge - HP DesignJet 750C Plus Quick Reference Manual

Replacing Cartridges

To Access the Cartridges
1 Leave the plotter switched ON.
2 If you are responding to a
otherwise, press the
carriage is not in use, it moves out so you can access it.
3 When the carriage stops, open the window.
The stainless steel strip behind the cartridge carriage
W A R N I N G
is very sharp. Keep hair, jewelry, clothing, and
foreign objects away from plotter mechanisms. Keep
new or used cartridges away from children.
To Check a Cartridge's Ink Level
Level indicator

To Remove a Cartridge

Press down lightly on the cartridge and pull it toward you. Lift it
out of its stall. Discard it, if it is not required.
Black
2
1
1
DesignJet 700
A dot above the stall indicates the color of the cartridge.
All manuals and user guides at all-guides.com
Service cartridges
Access Cartridges
DesignJet 750C Plus
19
request, press the key,
key. When the cartridge
Green = full
Less than half full
Black = empty
Yellow
Cyan
Magenta
Black
2
1
1
0002
1119