Clearing a Media Jam
1
Switch OFF the plotter, open the window and raise the media
lever.
Off
Don't touch the stainless steel strip behind the
W A R N I N G
cartridge carriage; it is very sharp. Keep hair,
jewelry, clothing, and foreign objects away
from plotter mechanisms.
When moving the cartridge carriage, touch
C A U T I O N
only the black plastic parts.
2
Carefully move the cartridge carriage out of the way.
If the plotter was cutting when it jammed, the cutter carriage
will move with it.
3
Carefully remove any of the jammed media which you can
easily lift up and out.
4
Carefully pull the rest of the roll or sheet down and out of
the media entry slot.
5
Lower the window and the lever and switch on the plotter.
Press the
Form Feed and Cut
still in the media path.
6
Reload the media
All manuals and user guides at all-guides.com
key to eject any pieces of media
14
Media lever
1867