To Load A Cartridge - HP DesignJet 750C Plus Quick Reference Manual

To Load a Cartridge

Always load cartridges with the plotter switched ON.
C A U T I O N
When handling cartridges, or the cartridge carriage,
touch only the black plastic parts.
1 Match the color of the cartridge label with that of the dot above
the stall.*
2 If the cartridge is new, remove the protective tape and tab from
its nozzles.
3 Press the cartridge lightly down into the stall and away from
you until it snaps into place.
1
DesignJet 700
r004
If the front panel displays
and installing the cartridge until the message disappears.
4 When you have finished, close the cover. The plotter runs the
cartridge-alignment procedure. When the front-panel displays
STATUS / Ready
* Users with color-vision deficiencies can identify the colors by the part
numbers on the boxes – see the Accessories List in the User's Guide.
All manuals and user guides at all-guides.com
2
2
1
Reseat cartridge(s)
, the procedure is complete.
20
Yellow
Cyan
Magenta
Black
1
2
DesignJet 750C Plus
, repeat removing
1754
0019