Specifications; Attachments/Accessories - Toro Groundsmaster 4010 Operator's Manual

Note:
Rotate the key switch to the O
then to the O position locks the protected menu.
N
You have the ability to view and change the settings in
the Protected Menu. Once you access the Protected
Menu, scroll down to Protect Settings option. Use the
right button to change the setting. Setting the Protect
Settings to O allows you to view and change the
FF
settings in the Protected Menu without entering the
PIN code. Setting the Protect Settings to O
protected options and requires you to enter the PIN
code to change the setting in the Protected Menu.
After you set the PIN code, rotate the key switch O
and back to the O position to enable and save this
N
feature.
Setting the Auto Idle
•
In the Settings Menu, scroll down to Auto Idle.
•
Press the right button to change the auto idle time
between Off, 8S, 10S, 15S, 20S, & 30S.
Setting the Maximum Allowed
Mow Speed
•
In the Settings Menu, Scroll down to Mow Speed
and press the right button.
•
Use the right button to increase the max full mow
speed (50%, 75%, or 100%).
•
Use the center button to decrease the max full
mow speed (50%, 75%, or 100%).
•
Press the left button to exit.
Setting the Maximum Allowed
Transport Speed
•
In the Settings Menu, scroll down to Transport
Speed and press the right button.
•
Use the right button to increase the max transport
speed (50%, 75%, or 100%).
•
Use the center button to decrease the max
transport speed (50%, 75%, or 100%).
•
Press the left button to exit.
When finished with the Protected Menu, press the left
button to exit to the Main Menu, then press the left
button to exit to the Run Menu.

Specifications

position and
FF
Note:
change without notice.
Width of cut
hides the
N
FF
Overall width
Overall length
Height
Height with cab
Ground clearance
Wheel tread (to center of tire)
Wheel base
(Net Weight with cab)

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
25
Specifications and design are subject to
overall
front cutting unit
side cutting unit
front and one side cutting unit
cutting units down
cutting units up (transports)
front
rear
335 cm (132 inches)
157 cm (62 inches)
107 cm (42 inches)
246 cm (97 inches)
345 cm (136 inches)
183 cm (72 inches)
342 cm (135 inches)
140 cm (55 inches)
237 cm (93.3 inches)
17 cm (6-1/2 inches)
114 cm (45 inches)
119 cm (47 inches)
141 cm (55-1/2
inches)
2159 kg (4759 lbs)