Safety; Safe Operating Practices - Toro Groundsmaster 4010 Operator's Manual

Safety

This machine has been designed in accordance
with EN ISO 5395:2013 and ANSI B71.4-2012.
Improper use or maintenance by the operator
or owner can result in injury. To reduce the
potential for injury, comply with these safety
instructions and always pay attention to the safety
alert symbol, which means Caution, Warning, or
Danger—personal safety instruction. Failure to
comply with the instruction may result in personal
injury or death.

Safe Operating Practices

Training
•
Read the Operator's Manual and other training
material carefully. Be familiar with the controls,
safety signs, and the proper use of the equipment.
•
Never allow children or people unfamiliar with
these instructions to use the mower. Local
regulations may restrict the age of the operator.
•
Never mow while people, especially children, or
pets are nearby.
•
Keep in mind that the operator or user is
responsible for accidents or hazards occurring to
himself or herself, other people, or property.
•
Do not carry passengers.
•
All drivers and mechanics should seek and obtain
professional and practical instruction. The owner is
responsible for training the users. Such instruction
should emphasize:
– the need for care and concentration when
working with ride-on machines;
– control of a ride-on machine sliding on a slope
will not be regained by the application of the
brake. The main reasons for loss of control are:
◊ insufficient wheel grip;
◊ being driven too fast;
◊ inadequate braking;
◊ the type of machine is unsuitable for its
task;
◊ lack of awareness of the effect of ground
conditions, especially slopes;
◊ incorrect hitching and load distribution.
Preparation
•
While mowing, always wear substantial,
slip-resistant footwear, long trousers, hard hat,
safety glasses, and hearing protection. Long
hair, loose clothing or jewelry may get tangled in
moving parts. Do not operate the equipment when
barefoot or wearing open sandals.
•
Thoroughly inspect the area where the equipment
is to be used and remove all objects which may be
thrown by the machine.
•
Warning–fuel is highly flammable. Take the
following precautions:
– Store fuel in containers specifically designed
for this purpose.
– Refuel outdoors only and do not smoke while
refuelling.
– Add fuel before starting the engine. Never
remove the cap of the fuel tank or add fuel
while the engine is running or when the engine
is hot.
– If fuel is spilled, do not attempt to start the
engine but move the machine away from the
area of spillage and avoid creating any source
of ignition until fuel vapors have dissipated.
– Replace all fuel tank and container caps
securely.
•
Replace faulty silencers/mufflers.
•
Before using, always visually inspect to see that
the blades, blade bolts, and cutting assembly are
not worn or damaged. Replace worn or damaged
blades and bolts in sets to preserve balance.
•
On multi-bladed machines, take care as rotating
one blade can cause other blades to rotate.
•
Evaluate the terrain to determine what accessories
and attachments are needed to properly and
safely perform the job. Only use accessories and
attachments approved by the manufacturer.
•
Check that operators presence controls, safety
switches, and shields are attached and functioning
properly. Do not operate unless they are
functioning properly.
Operation
•
Do not operate the engine in a confined space
where dangerous carbon monoxide and other
exhaust gasses can collect.
•
Mow only in daylight or in good artificial light.
•
Before attempting to start the engine, disengage
all blade attachment clutches and engage the
parking brake. Only start the engine from the
operator's position. Always use the seat belt and
ROPS together.
•
Remember there is no such thing as a safe slope.
Travel on grass slopes requires particular care. To
guard against overturning:
– Do not stop or start suddenly when going up
or downhill.
– The machine speed should be kept low on
slopes and during tight turns.
4