Toro Groundsmaster 4010 Operator's Manual page 50

Maintenance Service
Interval
Every 1,000 hours
Every 6,000 hours
Every 2 years
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and
seriously injure you or other bystanders.
Remove the key from the ignition before you do any maintenance.
Maintenance Procedure
• Check and adjust the valve clearance.
• Disassemble, clean, and assemble the soot filter of the DPF. or clean the soot
filter if engine faults
SPN
in the InfoCenter.
• Flush the cooling system and replace fluid.
• Replace moving hoses.
3720 16, 3720
FMI SPN FMI
50
0, or 3720 16 display
SPN FMI