Table of Contents
Advertisement
3) Press: UP + DOWN +UP + DOWN ! and then press the MENU button to go to the next menu.
4) Enter the
There are 11 pre-programmed White colors that can be edited by using RED, GREEN, BLUE and WHITE.
You can adjust the RGBW parameters to make different white colors.
When the new setting is activated, it is possible that the color is not full RGB.
If you have set a lower value for R, G or B (255, 255, 255), the entire output is also lower.
When you choose RGB= 255, 255, 255 on your DMX controller, the white color shown to you, will be
the one you manually made in the Calibration Menu
5) To exit this menu press the UP/Down buttons go to
DMX Channels
9 Channels (Tour)
Channel 1 – Master Dimmer
0-255
Channel 2 – Red
0-255
Channel 3 – Green
0-255
Channel 4 – Blue
0-255
Channel 5 – White
0-255
Channel 6 – Macro Colors
000 – 010
011 – 030
031 – 050
051 – 070
071 – 090
091 – 110
111 – 130
131 – 150
151 – 170
171 – 200
201 – 205
206 – 210
211 – 215
216 – 220
221 – 225
226 – 230
231 – 235
236 – 240
241 – 245
246 – 250
251 – 255
menu to select the white colors of a certain color temperature.
Brightness from 0 to 100%
Red gradual color brightness from 0 to 100%
Green gradual color brightness from 0 to 100%
Blue gradual color brightness from 0 to 100%
White gradual color brightness from 0 to 100%
No Function
Red 100% / Green Up / Blue 0%
Red Down / Green 100% / Blue 0%
Red 0% / Green 100% / Blue Up
Red 0% / Green Down / Blue 100%
Red Up / Green 0% / Blue 100%
Red 100% / Green 0% / Blue Down
Red 100% / Green Up / Blue Up
Red Down / Green Down / Blue 100%
Red 100% / Green 100% / Blue 100% / White 100%
White 1: 3200K
White 2: 3400K
White 3: 4200K
White 4: 4900K
White 5: 5600K
White 6: 5900K
White 7: 6500K
White 8: 7200K
White 9: 8000K
White 10: 8500K
White 11: 10000K
(CAL
RGB).
and then press the MENU button.
17
Advertisement
Table of Contents
