U-Line IH-99 Quick Start Manual

H-99
INDUSTRIAL AUTOMATIC
TAPE DISPENSER
Do not leave the tape
dispenser in direct sunlight.
Do not use the tape dispenser
in humid or dusty places.
• If using automatic feed, when one piece of tape is
removed, the unit will automatically feed and cut
the next piece at the preset length.
• The tape length is easily seen on the LED display,
and operation is simple. Press the CM key or MM key
to set the length. (Setting limit 20mm to 999mm.)
PAGE 1 OF 15
1-800-295-5510
uline.com
NOTES
Do not drop the tape
dispenser or subject it to
heavy shocks.
Do not insert bars or plates
into the tape outlet-this will
damage the blades.
FEATURES
• If a piece of long tape is needed, press the
ADVANCE key for desired length, then press CUT key
to cut.
• The blade unit can be removed and replaced easily.
(Tape jamming is also easily fixed by removing the
blade unit.)
Para Español, vea páginas 6-10.
Pour le français, consulter les pages 11-15.
Do not use volatile liquids
(benzine, thinner, etc.)
to clean the dispenser.
Wipe with dry cloth only.
DO NOT insert your fingers
into the tape outlet!
0922 IH-99