Set The Display Window; Clock Operation; Setting The Clock; Time Display - JVC TH-WL711B Instruction Manual

2.2ch wireless soundbar
Table of Contents

Advertisement

This instruction manual explains the basic instructions for operating this unit. Unless otherwise stated, all
operations described are based on remote control use.

Set the Display Window

Press the DISPLAY button on the remote control to switch on the display on the front
display window, on the top display window or both display windows.

Clock Operation

Setting the Clock

Manual setting the clock can only be done in Standby mode.
1. In Standby mode, press and hold CLOCK, the hour digits will fl ash.
Each activated state will be cleared if no buttons are pressed within 20 seconds.
2. Press
3. Press
4. Press CLOCK to confi rm. The minute digits will fl ash.
5. Press
6. Press CLOCK to confi rm.

Time Display

While the unit is On, press CLOCK to display the clock time for a few seconds.

Setting the Sleep Timer

Use the sleep timer to turn the system off after a certain number of minutes in play mode.
By setting the sleep timer, you can fall asleep to music and know that your system will turn
off by itself rather than play all night.
1. In On mode, press SLEEP repeatedly to select your desired number of minutes. The
number of minutes will display in this sequence:
2. Stop pressing SLEEP when your desired number of minutes is displayed. The sleep
timer is now set.
3. Press SLEEP to view the remaining time before switch off .
4. To cancel the sleep timer, press SLEEP repeatedly until "SLEEP 00" shows on the display.
18
to switch between 12-hours or 24-hours clock.
/
to adjust the hour digits while fl ashing.
/
to adjust the minute digits while fl ashing.
SLEEP 90
SLEEP 60
SLEEP 00
SLEEP 15
SLEEP 30

Advertisement

Table of Contents
loading

Table of Contents