3.7
SIM-card USSD support
Cellular-enabled routers can now use USSD to check their SIM card's balance, process pre-
paid cards, and configure carrier-specific services.
Click here for full instructions on using USSD
3.8
DPI Engine
The DPI report written in the updated KB article will show further information on InControl2
through breaking down application categories into subcategories.
https://forum.peplink.com/t/updated-ic2-deep-packet-inspection-dpi-reports-and-
everything-you-need-to-know-about-it/29658
3.9
NetFlow
NetFlow protocol is used to track network traffic. Tracking information from NetFlow can be
sent to the NetFlow collector, which analyzes data and generates reports for review.
Note: To enable this feature, go to https://<Device's IP>/cgi-bin/MANGA/support.cgi
https://www.peplink.com
59
Copyright @ 2021 Pepwave