Table of Contents
Advertisement
Network Bullet Camera·Quick Start Guide
Steps:
1. Install the adapter plate to the gang box.
2. Route the cables.
3. Fix the camera to the adapter plate with screws.
4. Adjust the surveillance angle. See step 4 in Section 2.2.
5. Install the water-proof jacket. See Section 2.5.
Gang Box
Adapter Plate
Camera Bracket
Figure 2-9 Installation with a Gang Box
2.5 Installation of Network Cable Water-proof
Jacket (Optional)
Purpose:
If the camera is installed outdoor, you can adapt the water-proof
accessory for the network cable after the camera is secured on the
installation surface.
20
Advertisement
Table of Contents
