Table of Contents
Advertisement
Network Bullet Camera·Quick Start Guide
It is recommended to adopt the water-proof jacket (supplied) for
the network interface when the camera is installed outdoor. See
Section 2.5.
4. Adjust the surveillance angle with supplied wrench.
1). Loosen No.1 lock screw to adjust the tilt angle [0 ° to 100°].
2). Loosen No.2 lock screw to adjust the pan angle [0° to 360°].
3). Loosen No.3 lock screw to rotate the camera [0° to 360°].
4). Tighten the lock screws.
0° to 360°
1
0° to 100°
Figure 2-5
2
3
Adjust the Surveillance Angle
Figure 2-6
Supplied Wrench
17
0° to 360°
Advertisement
Table of Contents
